L. E. Wilson Trimmer SS Standard W/ SS Handle 22-45 Cal (CTS-STDU)

Description

Stainless Steel Standard Case Trimmer with SS Handle and 22-45 Cal Cutter
Wilson case trimmers are unique in that the case is held by a case holder which simulates a rifle chamber. Cases are held in case holders by their own body taper. The case holders sit in a rail system that also holds the cutter housing insuring square and perfect alignment every time. Trimmers can be held in a vise or are compatible with the L.E. Wilson Case Trimmer Stand. Trimmers can also be used for inside neck reaming, military crimp removal, and case mouth deburring by adding additional cutters.
For reference:
The case holder holds the case for trimming, primer pocket reaming, neck reaming and deburring with our Uniform Deburring Tool.  Depending on the caliber we may only need to make one Case Holder.  But in some calibers we have to make a separate case holder sized and non-sized brass.  So if you are full length sizing 308 Win Brass you will need a NEW Case Holder.  But if you are neck sizing only 308 Win Brass, this does not change body diameters, so you will need a FIRED Case Holder.
On the other hand for the 223 Rem we only make one case holder.  That is what we now call a STANDARD Holder.  This will work for full length, neck sized or new brass.
Fired Case Holders
= Neck Sized only or if you are forming wildcat calibers and want to trim non-full length sized brass
New Case Holders
=  Full length sized cases or New factory brass
Standard Case Holders
=  These will work for all cases New or Fired
The handling charge is for package insurance.