.410 Gauge Shotgun Hull Trimming Jig - 3'' to 2.5'' Removable Safety

Description

Tired of making a mess with those other trimmers?
Struggle with jams, inconsistent trim lengths, or split hulls?
Try My Easy Trimming Jig Today!
Our jigs are designed in house by industry leading modeling software and fully certified designers,
You will notice the difference in the fit and function of our jigs versus the competition.
Trim Spent 3'' Hulls down to a perfect 2.5'' length.
Quick and Easy to Use!
NO Additional Modifications to Your Saw!
The Blade Will Never Contact Jig, or a Finger thanks to the only removable safety guard on the market.
Instal the Removable Guard when you need it, and remove when you don't!
Stock Trim Length - 2.5-2.51’’  ( depending on quality of the saw and accuracy of hinge )
Fits Harbor Freight and similar 2’’ mini chop saws
You will need to prepare the saw before use to get the best results.
1: Tram your saw - You will need to ensure the vise is aligned square to the blade. Tighten down the knob.
2: Open the vise and insert the jig until it rests square on the notch. Tighten the vise snug.
3. Insert one spent hull from the right side of the jig, and rest in the indent.
Hold the hull down and to the right, then make your cut.
4. The waste will drop free and fall towards the back leaving a perfectly cut case ready to load.
Deprime live brass prior to using this jig, and clean all cases well prior to loading.